 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Twin Channel (Stereo) Low Impedance Amplifiers
Two
Channel
- SA 2200: 2 x 200W @ 4ohm
- SA 2300: 2 x 320W @ 4ohm
- SA 2500: 2 x 500W @ 4ohm
Bridged
- SA 2200: 400W @ 8ohm
- SA 2300: 640W @ 8ohm
- SA 2500: 1000W @ 8ohm
• Speakon output connectors
• DC/SOA/Soft Start thermal protection
• Section of X-OVER filter with 3rd order Butterworth filters enabling
3 different operating modes:
- normal 'By-Pass' mode
- 'High-Pass' mode with Fc= 35Hz or 120Hz
- 'Low-Pass' mode with Fc= 120Hz
• 19" Rack mounting, 2U high
Front
Rear
Dimensions:
| Model: |  |
SA 2200 | SA 2300 | SA 2500 | ||||
| Characteristics | Twin channel | Twin channel | Twin channel | |||||
 |
|
|||||||
| Stereo output power | 2 x 200W (4ohm) | 2 x 320W (4ohm) | 2 x 500W (4ohm) | |||||
|
|
|||||||
| 'Bridge' output power | 400W (8ohm) | 400W (8ohm) | 1000W (8ohm) | |||||
|
|
|||||||
| Frequency response | 20Hz ~ 20kHz | 20Hz ~ 20kHz | ||||||
| 20Hz ~ 20kHz | ||||||||
|
|
|||||||
| Distortion (rated power) | < 0.02% | < 0.02% | < 0.02% | |||||
|
|
|||||||
Signal
/ Noise ratio |
> 100dB | > 102dB | > 105dB | |||||
|
|
|||||||
| Inputs/Sensitivity-impedance | 0.6V eff. | 0.7V eff. | 1V eff. | |||||
|
|
|||||||
| Minimum
load impedance |
4ohm
in stereo 8ohm in 'bridge' |
4ohm
in stereo 8ohm in 'bridge' |
4ohm
in stereo 8ohm in 'bridge' |
|||||
|
|
|||||||
| V AC Power supply | 230V AC | 230V AC | 230V AC | |||||
|
|
|||||||
| Protections | DC
/ Thermal / SOA / Soft Start |
DC
/ Thermal / SOA / Soft Start |
DC
/ Thermal / SOA / Soft Start |
|||||
|
|
|||||||
| Weight | 13kg | 15kg | 16kg | |||||
|
|
|||||||
| Dimensions | 482 x 410 x 88mm | 482 x 410 x 88mm | 482 x 410 x 88mm | |||||
|
|
|||||||
|
|
|||||||
Hi-res
Image
-
Front
- Rear
Product
Leaflet
Manual