CIE-Group - Exclusive representatives for FBT Audio Contractor
 
 
 
         

MCA 4060 4 x 60W Multi channel Amplifier Low Impedance

Channel pairs 1/2 and 3/4 can operate independently:
• In parallel (input signal of Ch1 also pilots Ch2)
• In stereo (each channel has a different signal on input)
• 'Bridge' (inputs are powered with the same signal in reverse phase) both in parallel and in stereo
4 x 60W @ 4ohm

2 x 120W @ 8ohm
Bridged
• Each channel has volume control, LED indicators of input signal and saturation
• Front panel also features LED indicators for operating modes (bridge, parallel, stereo)
• 2U, 19” Rack Mounting, 2U high

 
       
 
MCA 4060 4 x 60W 4 Channel Amplifier - Front
Front
 
MCA 4060 4 x 60W 4 Channel Amplifier- Rear
Rear
             

Dimensions:

     
             
Specifications:          
 Model:    MCA 4060
 Characteristics    19" rack mount, 2U high, multi channel amplifier
 Continuous power with all piloted channels    4 x 60W (4ohm)
 Minimum load impedance    4ohm (in stereo), 8ohm (in bridge)
 Frequency response @ 1W, -3dB    20Hz ~ 50kHz
 Harmonic distortion THD+N    < 0.05%

 Signal / noise ratio

   85dB (with filter 22Hz ~ 22kHz)
 Separation between channels    -66dB @ 100Hz, -75dB @ 1kHz, -70dB @ 10kHz
 Input impedance  10kohm (unbalanced) 20kohm (balanced)
   Input sensitivity
   0dBu (0.775V) with balanced input, 6dBu (1.5) with
unbalanced input
 Controls  Volume control for each channel
   Indicators    Visual LED indicators for each channel
   Output connector type    'Faston' connectors
   V AC power supply    230V 50Hz
 Absorbtion  300W (@ max power with music signal)
   Operating conditions    -20°C ~ 40°C with max. humidity <90%
   Protections    Thermal, short circuit, soft start
   Weight    7kg
 Dimensions  482 x 88 x 220mm (2U rack)
 Accessories   LTU 4060 Line transformer panel
 
 
 

Hi-res Image
- Front
- Rear

Product Leaflet
Manual