 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MCA 2075 - 2 x 75W Dual Channel 100V Line Amplifier
•
2 output transformers for constant voltage systems, with several output
sockets
• Frequency response 40Hz~20kHz
• Configurations possible
2 x 75W RMS, 1 x 150W RMS
• Designed to operate in emergency conditions
• 2 inputs for each power stage, one of which has priority over
the other
• Phantom Power supply
• Optional card for remote volume control (MMZ-VRC)
• Remote failure signal control, which will also activate a
recovery module
• Protections: thermal, short circuit and fuse on each
amplifier
• 19" Rack mounting, 2U high
Dimensions:
| Model: |  |
MCA 2075 | |||
| Characteristics | Monoblock amplifier with 2 channels 2 x 75W RMS | ||||
 |
|
||||
| Continuous power with all piloted channels | 1 x 150Wrms a 100V, 70V, 50V | ||||
|
|
||||
| Frequency response @1W -3dB on output 33V | 40Hz ~ 20kHz | ||||
|
|
||||
| Harmonic distortion THD+N | < 0.1% | ||||
|
|
||||
| Signal / noise ratio | 80dB (with filter 22Hz ~ 22kHz) | ||||
|
|
||||
Separation
between channels |
-66dB @ 100Hz, -75dB @ 1kHz, -70dB @ 10kHz | ||||
|
|
||||
| Inputs | A and B balanced, with screw connector (B priority) | ||||
|
|
||||
| Input impedance | 10kohm (unbalanced) 20kohm (balanced) | ||||
| Input
sensitivity |
0dBu (0.775V) with balanced input, 6dBu with unbalanced input | ||||
|
|
||||
| Controls | Level control for each channel on rear panel | ||||
| Emergency input signals | 0dBu | ||||
| Phantom power supply | 48V activated on all B inputs of each channel | ||||
| 'Failure' output, emergency | Open collector 12V DC / 80mA max | ||||
| Power supply ±15V DC, 100mA max on each channel | |||||
| Output power supply | |||||
| Output connector type | 3 pin 'Faston' connectors: common, line, emergency | ||||
| V AC power supply | 230V 50Hz | ||||
| Absorbtion | 150W (@ max power with music signal) | ||||
| Operating conditions | -20°C ~ 40°C with max humidity < 90% | ||||
| Protections | Thermal, short circuit, fuse on each amplifier | ||||
| LED indicators for each power stage | Input signal, saturation, thermal protection, power stage malfunction | ||||
| Optional accessories | Card for remote volume control of 2 channels Model MMZ-VRC | ||||
| Weight | 11.9kg | ||||
| Dimensions | 482 x 88 x 430mm (2U rack) | ||||
|
